Supplier
ALFYMA
Straight Conveyor Units & Right-Angle Transfer
Modular straight conveyor sections with ferrule-jointed 90-degree transfers for jam-free routing.
Pricing
Request a quote for current pricing, lead time and delivery to your airport.ALFYMA's straight conveyor units route baggage in line and inject onto downstream conveyors positioned at 90 degrees, using factory-made transfer-curve ferrules (screwed, never riveted or welded) for a gap-free flow that stops straps and labels jamming. Units are built from 3 mm steel side rails and a reinforced 2 mm sliding plate, driven by rubber-lined drive drums with offset belt-tensioning so the operator works outside the danger zone.
Specs at a glance
Technical specifications.
| Unit length | minimum 1.5 m with tracking, maximum 22 m per project; standard sections 1,500-3,000 mm |
| Ramp | max 10 deg with tracking, 15 deg without; stop cells at >=30 cm from unit end, input cells 1.5 m from belt entry |
| Removable inter-unit linkage edges 200-400 mm long; min 20 mm clearance between drum alternators | |
| Head-unit deflection roller 89 mm for optimum superimposition onto the next conveyor | |
| Supports | C40 zinc-coated steel base, vulcanised NBR rubber pads 80 shore, adjustable feet +/-10 cm |
| Ceiling-suspended option with lateral maintenance gangway rated 250 kg/m2, hangers at max 2 m spacing | |
Best for
Use cases.
- ›Linking check-in, sorting and make-up lines across a baggage hall
- ›Right-angle baggage injection and flow separation between conveyor lines
- ›Floor-mounted or ceiling-suspended conveyor runs in space-constrained terminals
Cross-shop the category
Replacements & compatible alternatives.
Comparable products from other suppliers. Cross-shop on specs — confirm exact fit and compatibility with the supplier before specifying.
