Supplier
CDS -AGL Grouts
Runway Lighting & Airfield Electrical
cds-AGL BaseGrout UW
Two-component epoxy grout for sealing in-pavement AGL light bases in concrete and asphalt runways.
Pricing
Request a quote for current pricing, lead time and delivery to your airport.A mineral-filled, easily pourable two-component epoxy reaction resin used to friction-lock the cavity between a shallow base for in-pavement (underfloor) airfield lighting and the core-drilled hole. It meets the requirements of FAA Specification AC 150/5370-10 G for AGL in concrete and asphalt airside surfaces, and offers Hardener S or FH variants to suit low or high ambient temperatures.
Specs at a glance
Technical specifications.
| Compliance | FAA Specification AC 150/5370-10 G (AGL), tested per Polymer Institut Florsheim-Wicker |
| Compressive strength | >= 70 MPa |
| Tensile bending strength | >= 30 MPa |
| Bonding strength to concrete | >= 1.5 MPa |
| Mixing ratio | 91.5 : 8.5; specific weight 1.86 g/cm3; solids content 99 +/- 1% by weight |
| Application/object temperature | +10 C to +35 C (Hardener S) / +10 C to +25 C (Hardener FH) |
| Service temperature | up to ~+80 C continuous (dry), ~+120 C short-term (dry) |
| Delivery unit | 8 kg incl. hardener; colours grey or black; VOC < 500 g/l |
Best for
Use cases.
- ›Grouting shallow bases for in-pavement runway/taxiway AGL fittings in concrete (full grout to surface)
- ›Grouting AGL bases in asphalt (to -3.0 cm below surface, topped with flexible material)
- ›AGL base installation across cold-to-hot ambient conditions via hardener selection
Cross-shop the category
Replacements & compatible alternatives.
Comparable Runway Lighting & Airfield Electrical from other suppliers. Cross-shop on specs — confirm exact fit and compatibility with the supplier before specifying.
