Hytera PT580H Plus (TETRA)
Mission-critical TETRA handheld built for the noise, pace and safety demands of airside operations.
The Hytera PT580H Plus is a portable TETRA terminal engineered for environments where voice clarity, personal-safety functions and regulatory-grade encryption must coexist in a device a ground operator can carry through a shift. It operates in both Trunked Mode (TMO) and Direct Mode (DMO), and can act as an ETSI Type 1A DMO Repeater to extend coverage into apron blind-spots — a capability that matters at large hub airports where infrastructure reach is uneven.
On the ramp, in hangars, and across terminal airside corridors, the PT580H Plus earns its place through a combination of 3 W RF output, an advanced noise-cancellation audio chip tuned for continuous background noise above 85 dB, and IP65/66/67/68 dust and water sealing per IEC 60529. MIL-STD-810G environmental testing covers shock, vibration, and temperature extremes — the conditions of GCC ramp work in summer are well within its rated envelope.
Safety functions are class-leading for a handheld: integrated GPS (cold-start under 35 seconds), Man Down alert with configurable tilt/no-motion thresholds, and Lone Worker timers address the duty-of-care requirements of dispersed ground staff. Up to 6,000 TMO talk groups and 23 programmable buttons support the multi-department, multi-zone channel plans typical of international airports. Over-the-air programming (OTAP) reduces fleet management overhead across large terminal deployments. The standard 1,800 mAh battery covers a 20-hour shift; a 2,500 mAh option is available for extended operations or device-sharing environments.
Technical specifications.
| Frequency Bands | 380–430 MHz (F3); 405–475 MHz (F4) |
| Operating Modes | TMO, DMO, ETSI Type 1A DMO Repeater |
| Talk Groups (TMO) | 6,000 |
| GPS Cold-Start | <35 s |
| Programmable Buttons | 23 |
| Receiver Class | ETSI EN 392-2 / 396-2 Class A & B |
| Encryption | Air Interface Encryption (AIE) + End-to-End Encryption (E2EE) |
| RF Power Output | 3 W |
| Display | 1.8 in, 160 × 128 px, 65,536 colours |
| Battery (standard) | 1,800 mAh Li-ion, 20 h runtime |
| Battery (extended) | 2,500 mAh Li-ion |
| Weight (with standard battery) | 374 g |
| Ingress Protection | IP65/66/67/68 per IEC 60529 |
| Environmental Standard | MIL-STD-810G |
| Dimensions | 127.5 × 55 × 36.5 mm |
Use cases.
- ›Airside ground-handling coordination — pushback, fuelling, marshalling and baggage teams on the same TETRA trunked network
- ›Airport security and perimeter patrol where Man Down and Lone Worker alarms are a statutory or operational requirement
- ›Emergency response integration — interoperability with airport ARFF and medical teams via encrypted group calls
- ›Large hub airports requiring DMO Repeater mode to fill infrastructure coverage gaps on the apron
- ›Fleet deployments under an OTAP-managed maintenance regime, reducing device downtime during firmware and channel-plan updates
- ›GCC and Middle East airports adopting or expanding TETRA infrastructure as the mission-critical standard