Side-by-side
HVM Glide Bollard Nano vs Senstar LM100
Spec comparison for two products on Aviation Souk. Both compete in perimeter-security.
| Cost of ownership | HVM Glide Bollard Nano | Senstar LM100 |
|---|---|---|
| Price tier | — | — |
| Lead time (weeks) | ?–? | ?–? |
| Delivery | — | — |
| Install | — | — |
| GCC airports deployed | 0 | 0 |
| Certifications | 0 | 5 |
Specs
Technical specifications.
| Spec | HVM Glide Bollard Nano | Senstar LM100 |
|---|---|---|
| undefined | — | |
| undefined | — | |
| undefined | — | |
| undefined | — | |
| undefined | — | |
| undefined | — | |
| System type | — | Combined fence-mounted intrusion detection (accelerometer) and LED security lighting - 2-in-1 luminaire |
| Detection | — | Built-in accelerometer per luminaire detects cut, climb and lift attempts; intrusions located to the nearest luminaire; EDAPT adaptive processing |
| Deterrence | — | Instant-on or strobe lighting at the intrusion location; can trigger warnings, alarms and camera cueing |
| Brightness | — | 53 lux per luminaire (163 total lumens), 120-degree coverage pattern, CRI greater than 70 full-spectrum light |
| Luminaire spacing | — | 3 to 6 m (10 to 20 ft) apart for optimal coverage; supports any fence height |
| LED life expectancy | — | 50,000+ hours minimum (15+ years at 9 h/day retaining over 70% brightness) |
| Power consumption | — | 2.5 W per luminaire; up to 95% reduction vs conventional perimeter lighting; gateway 0.5 W base / 1.0 W with comms card |
| Input power | — | 12 to 48 VDC (24 VDC or higher for multiple luminaires); 14 or 16 AWG 2-wire; integrated surge protection |
| Luminaires per gateway | — | up to 100 |
| Communications (luminaires) | — | Encrypted 2.4 GHz, 128-bit AES self-healing wireless mesh between luminaires; luminaire AP to gateway via RS-485 (2-wire); single low-voltage power wire along fence |
| Operating temperature | — | -40 to +70 deg C |
| Humidity | — | 100% condensing (luminaire and gateway) |
| Luminaire housing | — | Rugged UV-rated ASA and polycarbonate, NEMA Type 3S; welded aluminum mounting arm, black polyester powder finish; worm-gear clamps to fence posts, flanges for walls |
| Luminaire dimensions / weight | — | 98.4 x 14.3 x 5.1 cm / 740 g |
| Gateway enclosure | — | Rugged all-weather aluminum UL NEMA Type 4X, hinged locking cover, gray polyester powder finish, 5 compression-gland cable entries, external ground lug |
| Gateway dimensions / weight | — | 31.6 x 19.0 x 9.0 cm / 1.2 kg |
| Gateway I/O | — | 10 individually programmable I/O ports (light control inputs or assignable relay functions: alarm, supervision, door tamper, power fail, fail-safe; 100 mA power for external devices); optional 4-port relay-output or dry-contact-input cards; USB configuration port; alarm queuing on network loss |
| Gateway network connectivity | — | Ethernet 10/100BASE-TX with PoE (card powers gateway), RS-422, multi-mode fiber (up to 2.2 km, 820 nm ST) or single-mode fiber (up to 10 km, 1310 nm ST); Silver Network shared with other Senstar sensors |
| Configuration | — | Windows-based UCM via USB or network: illumination schedule/intensity/zones/duration/strobe, detection fence type/gain/filter/disturbance count, supervision and tamper alarm, real-time graphical plot |
| Light pollution control | — | Downward-directed 120-degree coverage; warm-white low-CCT option certified by the International Dark-Sky Association (IDA) |
| Integration | — | Network Manager to Senstar or third-party SMS; direct alarm-panel interface via I/O in non-networked sites; same network as FlexZone, OmniTrax, UltraLink, UltraWave |
Decide
Ask Aviation Souk to pick for your tender.
The AI weighs both products against your specific brief — airport, certifications, lead time, budget — and tells you which fits.
Ask the AI →