Side-by-side
HVM Securipod vs Senstar UltraWave
Spec comparison for two products on Aviation Souk. Both compete in perimeter-security.
| Cost of ownership | HVM Securipod | Senstar UltraWave |
|---|---|---|
| Price tier | — | — |
| Lead time (weeks) | ?–? | ?–? |
| Delivery | — | — |
| Install | — | — |
| GCC airports deployed | 0 | 0 |
| Certifications | 0 | 1 |
Specs
Technical specifications.
| Spec | HVM Securipod | Senstar UltraWave |
|---|---|---|
| undefined | — | |
| undefined | — | |
| undefined | — | |
| undefined | — | |
| undefined | — | |
| undefined | — | |
| Sensor type | — | Volumetric, fully digital bistatic microwave (paired transmitter and receiver, post- or wall-mounted, cylindrical detection zone) |
| Detection range | — | Walking target 5-200 m; crawling target 5-150 m; commando roll 5-100 m |
| Detection rate | — | Greater than 99% when properly installed |
| Operating frequency | — | 24.075-24.175 GHz band, 10 field-selectable channels, 24 dBm output (FCC); or 24.150-24.250 GHz harmonized band, 10 channels, 20 dBm output (ETSI/CE) |
| Signal processing | — | All-digital DSP discriminates intruder signatures (walking, running, crawling) from environmental effects; Automatic Gain Control compensates for Tx-Rx separation, conditions and weather; PLL-controlled VCO for ultra-stable frequency |
| Anti-spoofing | — | Receiver recognises only its paired transmitter; signal loss and jamming attempts reported; Tx-Rx communication via modulation of the microwave signal gives full transmitter supervision with no data wiring to the transmitter |
| Stackable | — | Yes - multiple Tx/Rx pairs stack on a common post to increase detection zone height; 10 channels allow adjacent/overlapping zones without interference |
| Clear zone requirement | — | Total width 4% of Tx-Rx separation, free of tall grass, vegetation and obstacles |
| Operating temperature | — | -40 to +70 deg C |
| Humidity | — | 0 to 95% non-condensing; conformal coated PCBs |
| Ingress rating | — | IP65 |
| Power | — | Transmitter 1.5 W; receiver with communications card 2.6 W; 12 to 48 VDC; PoE via optional Ethernet card; Tranzorb and gas-discharge protection on all I/O including power |
| Unit dimensions / weight | — | 31 x 16 x 8 cm / 0.9 kg each (Tx and Rx); 3.63 kg shipping weight per pair; high-impact ABS housing, marine white |
| Mounting | — | Pole-mount kit for posts 4.8-11.4 cm diameter included; wall mounting supported; two cable ports with glands, fits 13 mm conduit |
| On-board I/O | — | 4 Form C relay outputs (2 per Tx and Rx), 1.0 A at 30 VDC, assignable (alarm, tamper, power fail, fail-safe), activation programmable 0.125-10 s; auxiliary input on Rx |
| Communications | — | Optional cards: EIA-422 (up to 1.2 km), multi-mode fiber (up to 2.2 km, 820 nm ST), single-mode fiber (up to 10 km, 1310 nm ST), Ethernet 10/100BASE-TX with PoE; Silver Network shared with OmniTrax, FlexZone and XField; Crossfire network backward-compatible with MPS-4100; dual-end polled redundant data paths |
| Configuration | — | Windows-based UCM via USB or network; calculates optimum mounting height from Tx-Rx separation and stacking configuration; remote diagnostics over sensor network |
| Integration | — | Network Manager Service to Senstar StarNet 2 or third-party SMS |
Decide
Ask Aviation Souk to pick for your tender.
The AI weighs both products against your specific brief — airport, certifications, lead time, budget — and tells you which fits.
Ask the AI →