Side-by-side

Senstar UltraWave vs GS-21 Underground Sensor

Spec comparison for two products on Aviation Souk. Both compete in perimeter-security.

Cost of ownershipSenstar UltraWaveGS-21 Underground Sensor
Price tier——
Lead time (weeks)?–??–?
Delivery——
Install——
GCC airports deployed00
Certifications10
Specs

Technical specifications.

SpecSenstar UltraWaveGS-21 Underground Sensor
Sensor typeVolumetric, fully digital bistatic microwave (paired transmitter and receiver, post- or wall-mounted, cylindrical detection zone)—
Detection rangeWalking target 5-200 m; crawling target 5-150 m; commando roll 5-100 m—
Detection rateGreater than 99% when properly installed—
Operating frequency24.075-24.175 GHz band, 10 field-selectable channels, 24 dBm output (FCC); or 24.150-24.250 GHz harmonized band, 10 channels, 20 dBm output (ETSI/CE)—
Signal processingAll-digital DSP discriminates intruder signatures (walking, running, crawling) from environmental effects; Automatic Gain Control compensates for Tx-Rx separation, conditions and weather; PLL-controlled VCO for ultra-stable frequency—
Anti-spoofingReceiver recognises only its paired transmitter; signal loss and jamming attempts reported; Tx-Rx communication via modulation of the microwave signal gives full transmitter supervision with no data wiring to the transmitter—
StackableYes - multiple Tx/Rx pairs stack on a common post to increase detection zone height; 10 channels allow adjacent/overlapping zones without interference—
Clear zone requirementTotal width 4% of Tx-Rx separation, free of tall grass, vegetation and obstacles—
Operating temperature-40 to +70 deg C—
Humidity0 to 95% non-condensing; conformal coated PCBs—
Ingress ratingIP65—
PowerTransmitter 1.5 W; receiver with communications card 2.6 W; 12 to 48 VDC; PoE via optional Ethernet card; Tranzorb and gas-discharge protection on all I/O including power—
Unit dimensions / weight31 x 16 x 8 cm / 0.9 kg each (Tx and Rx); 3.63 kg shipping weight per pair; high-impact ABS housing, marine white—
MountingPole-mount kit for posts 4.8-11.4 cm diameter included; wall mounting supported; two cable ports with glands, fits 13 mm conduit—
On-board I/O4 Form C relay outputs (2 per Tx and Rx), 1.0 A at 30 VDC, assignable (alarm, tamper, power fail, fail-safe), activation programmable 0.125-10 s; auxiliary input on Rx—
CommunicationsOptional cards: EIA-422 (up to 1.2 km), multi-mode fiber (up to 2.2 km, 820 nm ST), single-mode fiber (up to 10 km, 1310 nm ST), Ethernet 10/100BASE-TX with PoE; Silver Network shared with OmniTrax, FlexZone and XField; Crossfire network backward-compatible with MPS-4100; dual-end polled redundant data paths—
ConfigurationWindows-based UCM via USB or network; calculates optimum mounting height from Tx-Rx separation and stacking configuration; remote diagnostics over sensor network—
IntegrationNetwork Manager Service to Senstar StarNet 2 or third-party SMS—
Sensing modalities—External seismic line strings (pedestrian) + internal magnetic sensor (vehicle presence and travel direction)
External sensor inputs—PIR (pedestrian/vehicle presence + travel direction) and contact-closure
Radio—Built-in 5 W VHF, strong foliage penetration
Radio range—Up to 35 miles line-of-sight
Battery life—1+ year
Output—Mechanical relay to trigger external devices (cameras, lights, sirens)
Security—Tamper switch
Timing—Real-time clock; programmable self-test messages and scheduled access windows
Compatibility—Legacy Vortex and Monitron systems
Decide

Ask Aviation Souk to pick for your tender.

The AI weighs both products against your specific brief — airport, certifications, lead time, budget — and tells you which fits.

Ask the AI →