Side-by-side

Respondol ATF 1x3% vs SUOLONG-AFFF3% ICAO

Spec comparison for two products on Aviation Souk. Both compete in Fire Safety & Rescue.

Cost of ownershipRespondol ATF 1x3%SUOLONG-AFFF3% ICAO
Price tier——
Lead time (weeks)?–??–?
Delivery——
Install——
GCC airports deployed00
Certifications01
Specs

Technical specifications.

SpecRespondol ATF 1x3%SUOLONG-AFFF3% ICAO
Induction rate (hydrocarbons)1 %—
Induction rate (polar solvents)3 %—
Foam typeAlcohol-resistant fluorine-free (AR-FF), non-NewtonianAFFF (aqueous film forming foam)
CertificationsUL162 Type II & III, ULC162 Type II & III, Lastfire (Good)—
Specific gravity @ 20 °C1.06–1.08—
pH @ 20 °C6.5–7.5—
Expansion ratio≥6:1—
25% drainage time30 minutes≥ 4 min
Freezing point-10 °C≤ −15 °C
Lowest operational use temp1.7 °C—
Max continuous storage temp49 °C—
Shelf life≥10 yearsUp to 15 years (unopened)
Biodegradability100% biodegradable—
Siloxane contentNone—
Mixture ratio—3%
Density (25°C)—1.00 g/cm³
Viscosity (20°C)—2 mm²/s
Viscosity (0°C)—5 mm²/s
Appearance—Pale yellow liquid
pH (20°C)—7.5
Precipitate—≤0.2 % V/V
Spreading coefficient—Positive mN/m
Foam expansion ratio—≥ 7.5
Storage temperature—−10 to +60 °C
Water compatibility—Soft, hard, fresh, brackish and sea water
Agent compatibility—All dry powders and known finished foams
Decide

Ask Aviation Souk to pick for your tender.

The AI weighs both products against your specific brief — airport, certifications, lead time, budget — and tells you which fits.

Ask the AI →
Respondol ATF 1x3% vs SUOLONG-AFFF3% ICAO · Aviation Souk