Side-by-side

Pathfinder Receiver (Base Station Kit) vs McQ TNet Repeater and Base Station

Spec comparison for two products on Aviation Souk. Both compete in perimeter-security.

Cost of ownershipPathfinder Receiver (Base Station Kit)McQ TNet Repeater and Base Station
Price tier——
Lead time (weeks)?–??–?
Delivery——
Install——
GCC airports deployed00
Certifications20
Specs

Technical specifications.

SpecPathfinder Receiver (Base Station Kit)McQ TNet Repeater and Base Station
Dimensions (H x D x W)2.1 x 7.2 x 8.4 in—
Weight3.76 lb—
Environmental ratingMIL-STD-810: Method 506.4 Procedure I (rain); Method 510.4 Procedures I and II (blowing dust and sand)—
Operating temperature-32 to +49 C (-25 to +120 F)—
Storage temperature-33 to +71 C (-28 to +160 F)—
Connectors2x MIL-style bayonet (power, RS-232 serial); 1x waterproof RJ-45 Ethernet; 1x TNC female antenna—
Power100-240 VAC, 47-63 Hz line power providing 12 VDCBA-series battery; external power, AC or solar panel; built-in solar charge controller
Sensor link rangetypically up to 10 km, terrain dependent; elevating the receiver antenna greatly increases effective range—
Kit contentsBase station with Pathfinder software installed, waterproof Ethernet receiver, antenna, 10 ft antenna cable, antenna mounting hardware, installation tools, user manual, quick-reference cards—
Standard sensor pairingKits normally include 60 Mini or 30 XL sensors; individual quantities customisable and expandable—
DeploymentUser-friendly, ready to use in minutes; no internet, gateways or relay infrastructure required—
Export classificationECCN 6A999.a under US Export Administration Regulations; export licence may be required depending on destination, user and end use—
RF data modem—UHF 900 MHz spread spectrum
Network channels—10 separate channels (one selectable per sensor network)
Network type—Self-forming; automatic neighbour recognition and message routing with guaranteed delivery
Alarm delivery—Inbound target detection messages delivered instantaneously through the repeater chain; outbound C2 messages with acknowledgement
Encryption—Available
Base Station I/O—Ethernet TCP/IP, RS-232 serial, built-in cell LTE modem, external power connector
Repeater I/O—External power connector, RS-232 serial connector, AC or solar panel (relay-only unit; no Ethernet/LTE)
Data formats—TCP/IP message protocol; CDIF binary sensor message format; XML, CoT, JSON or CDIF output to other systems
GPS—Internal GPS receiver with external antenna
Tamper—Selectable tamper report configurations
Configuration—Configured over the network or locally
Form factors—Outdoor rugged units and rack-mount units
Size (Base Station / Repeater)—8 x 6 x 3.75 in
Weight (including one BA-series battery)—5.5 lb
Decide

Ask Aviation Souk to pick for your tender.

The AI weighs both products against your specific brief — airport, certifications, lead time, budget — and tells you which fits.

Ask the AI →
Pathfinder Receiver (Base Station Kit) vs McQ TNet Repeater and Base Station · Aviation Souk