Side-by-side
Pathfinder Receiver (Base Station Kit) vs IRONCLAD Fence Alarm System
Spec comparison for two products on Aviation Souk. Both compete in perimeter-security.
perimeter-security
Pathfinder Receiver (Base Station Kit)
by ara
MIL-STD-810-rated base station that turns Pathfinder ground sensors into a live intrusion-alert network
perimeter-security
IRONCLAD Fence Alarm System
by rbtec
Armored vibration sensor cable that turns any fence into a cut-and-climb intrusion detector.
| Cost of ownership | Pathfinder Receiver (Base Station Kit) | IRONCLAD Fence Alarm System |
|---|---|---|
| Price tier | — | — |
| Lead time (weeks) | ?–? | ?–? |
| Delivery | — | — |
| Install | — | — |
| GCC airports deployed | 0 | 0 |
| Certifications | 2 | 0 |
Specs
Technical specifications.
| Spec | Pathfinder Receiver (Base Station Kit) | IRONCLAD Fence Alarm System |
|---|---|---|
| Dimensions (H x D x W) | 2.1 x 7.2 x 8.4 in | — |
| Weight | 3.76 lb | — |
| Environmental rating | MIL-STD-810: Method 506.4 Procedure I (rain); Method 510.4 Procedures I and II (blowing dust and sand) | — |
| Operating temperature | -32 to +49 C (-25 to +120 F) | -40°C to +105°C (-40°F to 221°F) |
| Storage temperature | -33 to +71 C (-28 to +160 F) | — |
| Connectors | 2x MIL-style bayonet (power, RS-232 serial); 1x waterproof RJ-45 Ethernet; 1x TNC female antenna | Sensor input 8x screw terminal (pair per zone); alarm output 8x screw terminal (pair per zone) |
| Power | 100-240 VAC, 47-63 Hz line power providing 12 VDC | 12-24 VDC, 300 mA @ 12 VDC |
| Sensor link range | typically up to 10 km, terrain dependent; elevating the receiver antenna greatly increases effective range | — |
| Kit contents | Base station with Pathfinder software installed, waterproof Ethernet receiver, antenna, 10 ft antenna cable, antenna mounting hardware, installation tools, user manual, quick-reference cards | — |
| Standard sensor pairing | Kits normally include 60 Mini or 30 XL sensors; individual quantities customisable and expandable | — |
| Deployment | User-friendly, ready to use in minutes; no internet, gateways or relay infrastructure required | — |
| Export classification | ECCN 6A999.a under US Export Administration Regulations; export licence may be required depending on destination, user and end use | — |
| Detection principle | — | Fence-mounted vibration sensor cable with frequency-discrimination algorithm |
| False alarm filtration | — | 3 layers |
| Protected fence height | — | Up to 3 m (10 ft) with a single cable run |
| Max cable per processor | — | 600 m (2,000 ft) |
| Zones per processor | — | 2, with separate alarm outputs |
| Sensitivity adjustment | — | 22 levels per zone on board; 500 levels via software |
| Zone arm/disarm | — | 8x via jumper |
| Sensor cable | — | 6 mm (1/4 in) outer diameter, stainless steel braid armor, metallic silver |
| Cable spool lengths | — | 75 m / 152 m / 305 m (250 / 500 / 1,000 ft), pre-cut |
| Ready-to-install kits | — | 6 configurations, single or dual zone, 75-610 m (250-2,000 ft) of sensor line; each kit includes field analyzer with cable |
| Kit part numbers | — | RB-IROC1Z250, RB-IROC2Z250, RB-IROC1Z500, RB-IROC2Z500, RB-IROC1Z1000, RB-IROC2Z1000 |
| Processor | — | LPU-402 (board RB-LPU402; complete 2-zone kit with enclosure + 2 EOL: RB-ELC2ZKIT) |
| Alarm inputs | — | 2/4 IRONCLAD sensor cable inputs; 4 intrusion + line-monitored accessory inputs (magnets, contacts, microwaves, motion detectors); 1 tamper switch |
| Alarm outputs | — | 8 dry-contact relays, NO/NC, rated 1 A @ 12 VDC; plus 1x tamper switch relay and 1x power outage relay |
| Communication to PC | — | USB-C; optional RS485 or IP |
| Lightning protection | — | 2-layer surge protection; gas discharge devices on all inputs/outputs and communication lines |
| Humidity | — | Up to 98%, non-condensing |
| Enclosure | — | NEMA 4X, IP-66; 24 x 19.5 x 7.0 cm (9.5 x 7.5 x 2.75 in); 1 kg (2.2 lb) |
| Fence types | — | Chain link, welded mesh, palisade, concertina coil, barbed wire |
| Accessories | — | Stainless steel cable ties + installation tools (RB-RBTIES610), end-of-line termination (RB-RBMCTR), weatherproof splice/extension unit (RB-RBMCTXT), gate connector (RB-GATECONN), sliding gate kit (RB-SLIDINGKIT) |
| Installation | — | Plug and deploy; no training, certification or special tools; simple calibration; maintenance free |
| Sensor cable warranty | — | 2 years |
Decide
Ask Aviation Souk to pick for your tender.
The AI weighs both products against your specific brief — airport, certifications, lead time, budget — and tells you which fits.
Ask the AI →