Side-by-side

Pathfinder Receiver (Base Station Kit) vs Seismo Unattended Ground Sensor (UGS) Security System

Spec comparison for two products on Aviation Souk. Both compete in perimeter-security.

Cost of ownershipPathfinder Receiver (Base Station Kit)Seismo Unattended Ground Sensor (UGS) Security System
Price tier——
Lead time (weeks)?–??–?
Delivery——
Install——
GCC airports deployed00
Certifications20
Specs

Technical specifications.

SpecPathfinder Receiver (Base Station Kit)Seismo Unattended Ground Sensor (UGS) Security System
Dimensions (H x D x W)2.1 x 7.2 x 8.4 in—
Weight3.76 lb—
Environmental ratingMIL-STD-810: Method 506.4 Procedure I (rain); Method 510.4 Procedures I and II (blowing dust and sand)—
Operating temperature-32 to +49 C (-25 to +120 F)-30°C to +70°C (-22°F to +158°F)
Storage temperature-33 to +71 C (-28 to +160 F)—
Connectors2x MIL-style bayonet (power, RS-232 serial); 1x waterproof RJ-45 Ethernet; 1x TNC female antenna—
Power100-240 VAC, 47-63 Hz line power providing 12 VDC—
Sensor link rangetypically up to 10 km, terrain dependent; elevating the receiver antenna greatly increases effective range—
Kit contentsBase station with Pathfinder software installed, waterproof Ethernet receiver, antenna, 10 ft antenna cable, antenna mounting hardware, installation tools, user manual, quick-reference cards—
Standard sensor pairingKits normally include 60 Mini or 30 XL sensors; individual quantities customisable and expandable—
DeploymentUser-friendly, ready to use in minutes; no internet, gateways or relay infrastructure required—
Export classificationECCN 6A999.a under US Export Administration Regulations; export licence may be required depending on destination, user and end use—
Detection principle—Buried seismic geophone sensing units with real-time AI classification; designed to pick up only security-related vibrations — does not sense earthquakes
Detection pattern per sensor—Circular (360°), up to 10 m (33 ft) diameter
Sensors per system—4 or 8 geophone sensing units + analyzer
Sensor spacing—6-10 m (20-32 ft), pre-installed on the cable
Coverage per system—Up to 80 m (250 ft)
Detection coverage—4-sensor system: 4x 10 m diameter; 8-sensor system: 8x 10 m diameter
Installation layouts—Line (up to ~40 m / 130 ft run) or square (~22-40 m / 80-130 ft) configurations
Event classification—Steps / vehicle, with configurable sensitivity level per threat type
Sensitivity—Set and registered per sensor
Calibration—Machine-learning algorithm continuously auto-calibrates to environmental influences; included calibration software (Windows PC, Ethernet needed for configuration only)
Versions—Standalone or IP network
Outputs—Dry-contact relays, N.O./N.C.; optional wireless
Integration—Any existing security system, burglar alarm or CCTV via dry contact / DC relay
Power supply—12-48 VDC
Current draw—500 mA @ 12 V
Sensor ingress protection—IP68
Environmental immunity—Resistant to extreme weather and temperature changes; no interference from vegetation or strong winds; works in a large variety of terrains, in any ground, without preparation
Installation—Plug & play, installation in minutes; no training or special tools; designed to work without maintenance
Decide

Ask Aviation Souk to pick for your tender.

The AI weighs both products against your specific brief — airport, certifications, lead time, budget — and tells you which fits.

Ask the AI →
Pathfinder Receiver (Base Station Kit) vs Seismo Unattended Ground Sensor (UGS) Security System · Aviation Souk