Side-by-side

RaySense AI DAS Fiber Optic Fence Security System vs GSE-DD Dual PIR Direction-Detection Sensor

Spec comparison for two products on Aviation Souk. Both compete in perimeter-security.

Cost of ownershipRaySense AI DAS Fiber Optic Fence Security SystemGSE-DD Dual PIR Direction-Detection Sensor
Price tier——
Lead time (weeks)?–??–?
Delivery——
Install——
GCC airports deployed00
Certifications30
Specs

Technical specifications.

SpecRaySense AI DAS Fiber Optic Fence Security SystemGSE-DD Dual PIR Direction-Detection Sensor
Detection principleDistributed Acoustic Sensing (DAS) via Coherent Optical Time Domain Reflectometer (COTDR) on standard single-mode fiber—
DeploymentFence-mounted; hybrid system — same cable can be used on the fence and underground—
Detection distance1-100 km (1-60 mi) per processing unit; up to 50 km (31 mi) in straight-line configuration—
Recommended perimeter length3 km (1.9 mi) and above—
Localisation resolution3 m (10 ft) between detection points along the sensing fiber—
Simultaneous event separation40 m (130 ft) minimum cable separation between individually reported disturbances—
Cut resilienceDetects to within 10 m (30 ft) of a fiber cut; within 10 m on either side of the cut in redundant loop configuration—
Channels1- or 2-channel unit; two fiber channels of simultaneous real-time independent detection per device—
Event classificationAI signature-based detection-by-classification; deep-learning algorithms (150,000+ training records per OEM page), separate algorithm sets for fence and buried; offline AI, no monthly fee—
Nuisance alarm handlingDetection parameters adjustable by location—
ZonesSoftware-configurable independent sensor sections—
Sensor cableStandard single-mode fiber optic cable; maximum fiber loss 12 dB; no field power or electronics—
System interfaceWeb 2.0; IP-based remote control and monitoring—
IntegrationTCP/IP (Ethernet); relay closures via connected PLC or ADAM module—
Ports2x FC/APC single-mode optical connectors, 1x USB2, 1x Ethernet 10/100/1000 Mbps—
Power supply110-240 VAC, 47-63 Hz, auto-ranging—
Power consumption85 W typical, 125 W max—
Form factor19 in / 2U rack; 49 x 50 x 8.9 cm; 8 kg—
Controller operating temperature0-40°C (32-104°F), air-conditioned environment—
Operating life>10 years (dependent on environment and regular maintenance)—
MTBF80,000 hours—
Laser safetyClass 1 (IEC 60825-1, 21CFR1040.10); key-switch shutoff on front panel—
CertificationCE — EMC Directive 2014/30/EU (EN 55032:2015 Class A et al.) + Low Voltage Directive 2014/35/EU (IEC 62368-1:2018); ISO 9001 accredited design and manufacturing—
Warranty2 years, optional per-year extension—
Sensing modality—Dual passive infrared (PIR only)
Coverage—Two separate paths monitored simultaneously, with direction of travel for vehicles or pedestrians
Radio—Long-range VHF with adjustable RF output power
Battery life—1 year
Sensitivity—Independently configurable per sensor channel
External input—Configurable connector for optional contact-closure sensor types
Enclosure—Rugged compact fiberglass-reinforced polycarbonate with continuous poured-foam gasket
Security—Built-in tamper sensor
Decide

Ask Aviation Souk to pick for your tender.

The AI weighs both products against your specific brief — airport, certifications, lead time, budget — and tells you which fits.

Ask the AI →