Side-by-side

BroadShield GNSS Jamming & Spoofing Detection (SecureSync Interference Detection Suite) vs Septentrio PolaRx5TR GNSS Time and Frequency Transfer Receiver

Spec comparison for two products on Aviation Souk. Both compete in Air Traffic Control & Navigation Aids.

Cost of ownershipBroadShield GNSS Jamming & Spoofing Detection (SecureSync Interference Detection Suite)Septentrio PolaRx5TR GNSS Time and Frequency Transfer Receiver
Price tier——
Lead time (weeks)?–??–?
Delivery——
Install——
GCC airports deployed00
Certifications06
Specs

Technical specifications.

SpecBroadShield GNSS Jamming & Spoofing Detection (SecureSync Interference Detection Suite)Septentrio PolaRx5TR GNSS Time and Frequency Transfer Receiver
Jamming detectionCW tone, swept CW, pulsed CW, AWGN, BPSK and more—
Spoofing detectionGNSS simulator signatures, GPS data anomalies, data inconsistencies, position jumps, time jumps—
Monitored signalsGPS L1 (1575.42 MHz) and L2 (1227.6 MHz)—
Hardware requirementsWorks with standard commercial GPS/GNSS receivers — no additional hardware required—
SecureSync integration (SS-OPT-BSH)event logging, alarms, SNMP/email notification, automatic disabling of GNSS sync with switch to backup reference or oscillator holdover—
Embeddable software libraryconvertible to most major programming languages, runs on nearly any operating system—
Integration requirementsGPS receiver providing raw GPS NAV data + processing unit + Safran integration support—
Threat library updatesDetection algorithms regularly updated against new and emerging threats; field-proven 10+ years—
Ordering / variantsSS-OPT-BSH — Interference Detection Suite option for SecureSync time servers (software option, also available as field upgrade); BroadShield SDK — embeddable software library for OEM hardware platforms via Safran Federal Systems; complemented by BroadSense interference detection sensors.—
Hardware channels—544 (GReCo4 tracking processor)
Constellations tracked—GPS (P-code L1/L2, L2C), GLONASS, Galileo, BeiDou, NavIC — all visible signals
Timing compliance—CGGTTS V2E on board and on PC; compliant with CCTF recommendations 4 and 5 (2015)
Code-carrier bias—0 by design
Inter-frequency code bias—< 10 ns
Code measurement precision—< 0.5 ns
Phase measurement precision—< 5 ps
PPS-in delay calibration precision—20 ps
1 PPS out accuracy / rise time—5 ns / < 2 ns
Interference monitoring—AIM+ monitors, flags and mitigates narrow/wideband interference, jamming and spoofing; spectrum analyser; operation near chirp jammers
Anti-spoofing—Galileo OSNMA support
Timing I/O—10 MHz REF IN (50 Ω) and REF OUT (1.1 Vpp sine), monitored 1 PPS IN, 5 V PPS OUT up to 100 Hz
Max raw data rate—100 Hz
Data formats—CGGTTS V2E, SBF, RINEX v2.x/3.05/4.00, BINEX, NMEA v2.30/v4.10, RTCM MSM (optional)
Interfaces—4 hi-speed serial, 100 Mbps Ethernet (PoE), Wi-Fi 802.11 b/g/n, USB device + USB host, HTTP/HTTPS, FTP/SFTP, NTRIP
Onboard logging—16 GB, up to 48 logging jobs
Power consumption—3–5 W
Input voltage—9–30 VDC
Dimensions—235 × 140 × 37 mm
Weight—940 g
Operating temperature—−40 to +65 °C
Decide

Ask Aviation Souk to pick for your tender.

The AI weighs both products against your specific brief — airport, certifications, lead time, budget — and tells you which fits.

Ask the AI →